RK3127 Process Particulate Monitor
Our RK3127 Process Particulate Monitor is designed to operate with our model 201LP triboelectric probe, or other compatible probes.
Up to four (4) 201LP probes can be connected to each monitor. The Model 201LP monitor uses the Triboelectric principle to measure the electrical charge imparted by dust particles as they strike the probe. The charge picked up by the probe is converted to an electrical current, which is measured by the Process Particulate Monitor and is displayed in line graph form on a color LCD screen, along with peak and baseline threshold indicators.
ApplicationsApplications for the Process Particulate Monitor include but are definitely not limited to process control, dry solid levels, and environmental applications such as:
SensitivityThe monitor can detect and display a particulate loading as small as .0005gr/dscf (1mg/m3).
There are five selectable sensitivity ranges to cover most requirements.
Ease of InstallationJust connect a 120 volt source and the three wires from each probe to an input terminal and the probe is installed. An internal 24 volt power supply feeds the probes.
Typical Adjustment Screen
Typical Monitor Cabinet Dimensions
Typical Probe Dimensions